Home About Contact Us Quality/Terms City Map


Stealth Aerospace Capabilities

Services:
 
   AOG Service
     Inventory Control
     Delivery

Distribution Line:

     Lamps
     Connectors
     Switches
     Latches
        Latches and Catches
        Single Point Paddle Latches
        Two Point Paddle Latches
        Three Point Paddle Latches
        Slide Latches
        Safety and Double Bolt
            SAM28   DIMS
            SAM31   DIMS
            SAM150   DIMS
            SAM151   DIMS
            SAM152   DIMS
            SAM153   DIMS
            SAM271   DIMS
            SAM272   DIMS
            SAM274   DIMS

        1/4 Turn Retainers
        Escutcheons, Handles, Knobs
        Bolting Systems
        Hinges and Strikers
        Hydraulic and Air Operators
        Closet Coat Rods and Hooks

     Miscellaneous
     Relays
     Timers
     Cables
     Fans
     Circuit Breakers
     Smoke Detectors
Sample Parts

 

Sealth Aero Marine   Safety Latches & Double Bolt
 

Series Description Details
  SAM28 Frictionless Latch Assembly A rectangular double bolt latch featuring a single actuating lift handle.
  SAM31 Frictionless Latch Assembly A wide rectangular double bolt latch assembly.
  SAM150 Dual Bolt Assembly Machined oval dual point latch
Uses Striker SAM-233-9-x (1 thru 6)
  SAM151 Frictionless Dual Bolt Latch Assembly A Square double bolt and lift handle latch assembly.
  SAM152 Frictionless Dual Bolt Latch Assembly A oval dual handled duel bolt assembly.
  SAM153 Frictionless Dual Bolt Latch Assembly A square latch assembly similar to the SAM 151.
  SAM271 Dual Bolt / Dual Purpose Latch Designed by customer request. The SAM 271 Features two independent latch mechanisms in a single enclosure, featuring one easy close slam and one detented dead bolt latch. Typically installed where dual restraint is requires by the FAA.
SAM272 Dual Bolt / Dual Purpose Latch Similar to the SAM 271 with the exception of a deeper housing and offset bolts allowing for overlay doors or panels.
SAM274 Double Bolt Latch Assembly Two independent stainless steel latch mechanisms in a single stainless steel enclosure. Featuring one standard slam type bolt and one detented dead bolt.

Available Configurations

 

Part Number Picture
  SAM150  
 
These can use the SAM233-9-x strikers.
 
  SAM151 SAM151-1

(Top View)

(Bottom View)

SAM151-7

All SAM151 are the same basic rectangular shape of 2.50" X 2.16"

-1 Basic latch with no finish, and 0.500" deep
-2 Same as -1, but with grain and lacquer finish.

-3 Same as -1 , but with a fixed customs seal, no finish
-4 Same as -3, but with grain and lacquer finish.

-5 Same as -3 , but is .848 deep (vs .500), no finish
-6 SAME as -5 , but with grain and lacquer finish.

-7 Same body as -1, but it is a 2 point paddle latch with remote satellite end fittings, dual lift handles, and is also 0.500" deep, no finish
-8 SAME as -7, but with grain and lacquer finish.

-9 Same as -1, except housing and lift handles are machined from 303 stainless (vs 6061 alum for all others)
 

 
  SAM271  



 
 
SAM272
  SAM274

 

 

 
The technical information provided in this website is to be used as general information only.  
Send mail to webmaster@stealthaerospace.com with
questions or comments about this web site.
Copyright 2009-2016 Stealth Aerospace, Inc.