Home About Contact Us Quality/Terms City Map


Stealth Aerospace Capabilities

Services:
 
   AOG Service
     Inventory Control
     Delivery

Distribution Line:

     Lamps
     Connectors
     Switches
     Latches
        Latches and Catches
        Single Point Paddle Latches
        Two Point Paddle Latches
        Three Point Paddle Latches
        Slide Latches
        Safety and Double Bolt
            SAM28   DIMS
            SAM31   DIMS
            SAM150   DIMS
            SAM151   DIMS
            SAM152   DIMS
            SAM153   DIMS
            SAM271   DIMS
            SAM272   DIMS
            SAM274   DIMS

        1/4 Turn Retainers
        Escutcheons, Handles, Knobs
        Bolting Systems
        Hinges and Strikers
        Hydraulic and Air Operators
        Closet Coat Rods and Hooks

     Miscellaneous
     Relays
     Timers
     Cables
     Fans
     Circuit Breakers
     Smoke Detectors
Sample Parts

 

Sealth Aero Marine  Safety Latches & Double Bolt 

SAM 150

Series Description Details
SAM150 Dual Bolt Assembly Machined oval dual point latch. The SAM 150 series latches have been tested to withstand 500lbs static load at the bolt ends (worst case scenario) without any adverse effect to the latch.
Uses Striker SAM-233-9-x (1 thru 6)

  Available Configurations

These can use the SAM233-9-x strikers.
 

  Part Number Picture  
   

SAM150-1


Click for dimensions
Sam150-1 is flat body, two bolts
operated by one lift handle,
and is unfinished and unassembled.
 
  SAM150-2
Click for dimensions

Same as SAM150-1, sold assembled
and with Satin Grain Anodized Finish. 
 
  SAM150-3 Obsolete  
  SAM150-4 Obsolete  
  SAM150-5
SAM150-9
SAM150-13
SAM150-18
SAM150-21

SAM150-5 Shown above


SAM150-9 Shown above

Dual handle, Contoured (domed) body,
two bolts operated independently by two lift handles

 -5 Unassembled, Unfinished
 -9 A
ssembled, Satin Grain and Rocho Lac.
-13 Assembled, Clear Anodize
-18 Assembled, Clear Anodize, Red Decal
-21 Assembled, Satin Grain and Rocho Lac, Red Decal

Click for dimensions

 
  SAM150-6
Special
 
 
  SAM150-7
Special version with a key lock
Click for dimensions
 
 
  SAM150-8
Same as SAM150-7
Except sold assembled and finished with clear anodize

Click for dimensions
 
 
 

SAM150-10
SAM150-45


Same as -7
Except with special design for a Customer Provided custom proprietary lock

-10 With cover plate
-45 Without cover plate

Click for dimensions
 

 
  SAM150-11
SAM150-12
SAM150-19

SAM150-22

Has a lock ring to insert a customs seal if needed.

-11 Unassembled, Unfinished
-12 Assembled, Satin Grain and Rocho Lac
-19 Assembled, Satin Grain and Rocho Lac, Red Decal

-22 Assembled, Satin Grain and Rocho Lac, Red Decal
Material for housing and lift handle is 7075-T6 instead of 6061.  Sometimes used to match interior of aircraft.  Also ends up being a stronger version.
 

 
  SAM150-14 Special Design
Same as SAM150-9, except it comes with no lift handle.  It is designed for customer who wants to use their own special customer design lift handle.
 
  SAM150-15    
  SAM150-16
SAM150-17
SAM150-28
Same as SAM150-5, -9, and -13
except designed with an extended longer bolt

Dual handle, Contoured (domed) body,
two bolts operated independently by two lift handles

-16 Unassembled, Unfinished
-17 A
ssembled, Satin Grain and Rocho Lac.
-28 Assembled, Clear Anodize
 

 
  SAM150-20
SAM150-26

SAM150-24
SAM150-25

2 Point Design
Same body as the SAM150 series, except this is a 2 point bolting system

-20 Satin Brush Finish, End fittings are die cast alum.
-26 Unfinished, End fittings are die cast alum.

-24 Satin Brush Finish, End fittings are machined alum.
-25 Unfinished, End fittings are machined alum.
 

 
  SAM150-27
Same as SAM150-5
Except has a deeper housing
designed for a deeper 5/8" panel (normal is 1/2").
 
 
  SAM150-30
SAM150-31
2 Point Design
Customer Special
 
  SAM150-40
SAM150-41
2 Point Design
Same body as the SAM150 series, except this is a 2 point bolting system
Has Dual Bolt End Fittings

-40 Unfinished, End fittings are die cast alum.
-41 Satin Brush Finish, End fittings are die cast alum

 

 
 
The technical information provided in this website is to be used as general information only.  
Send mail to webmaster@stealthaerospace.com with
questions or comments about this web site.
Copyright 2009-2016 Stealth Aerospace, Inc.