| Stealth
Aerospace Capabilities
Services:
AOG
Service
Inventory
Control
Delivery
Distribution Line:
Lamps
Connectors
BACC45
DC2x
DC6x
How
to Order
Sample
Parts
BACC63
MS24264
MS24266
Switches
Latches
Relays
Timers
Knobs
Cables
Fans
Circuit Breakers
Smoke Detectors
Sample Parts
Hardware Capability
|
DC60, DC61, DC62, DC63 Douglas
Connectors
When ordering these connectors from Stealth
Aerospace, Inc, you may refer to the following table to help you understand some
of your requirements. Please be aware that Stealth Aerospace adds the
proper accessory per your order. You do not need to order accessories separately.
| Douglas Series |
Accessory |
Shell Size |
Shell Material and
Finish |
Insert Arrangement |
Contact Type |
Polarization |
| DC60 |
F |
10SL |
K |
4 |
S |
N |
DC60
DC61
DC62
DC63 |
Available
Accessories are:
"-", E, F, L, Y |
Available Shell Sizes are:
8S, 10S, 10SL, 12S, 12, 14S, 14, 16S, 18, 20, 22, 24, 28, 32, 36, 40 |
Available options
are:
"-",J, W, S, K, M |
Per Mil Std
1651. Too many to list. |
S - Sockets
P - Pins |
N - normal
W, X, Y, Z |
Detailed Descriptions
| Series: |
DC60 - Receptacle, Flange Mount Socket |
|
DC61 - Receptacle, Flange Mount Pin
DC62 - Plug, Cable, Socket
DC63 - Plug, Cable Pin |
| Accessory: |
"-" - No Accessory |
|
E - Grommet Seal |
|
F - Grommet Seal Strain Relief Clamp |
|
L - Grommet Seal 90 degree strain relief
clamp |
|
Y - Grommet Seal 45 degrees strain relief
clamp |
| Shell Size: |
See above |
| Shell
Material: |
"-" - Aluminum shell for plug and
receptacle conductive electroless nickel finish, hex non-locking
coupling nut |
|
J - Aluminum shell for plug and receptacle
conductive electroless nickel finish, self locking coupling nut |
|
W - Aluminum shell for plug and receptacle
O.D. cadmium finish, self-locking coupling nut |
|
S - Stainless steel shell for plug and
receptacle, passivated self-locking coupling nut, for FIREWALL use. |
|
K - Cold-rolled steel shell for plug and receptacle,
O.D. cadmium finish self-locking coupling nut, for FIREWALL use. |
|
M - Cold-rolled steel shell for plug and receptacle,
O.D. cadmium finish hex non-locking coupling nut, for FIREWALL use. |
|
|
Please use this page for general information
only. Do not rely on this information for design or installations without
the proper documentation and training from the original OEM, QPL, and/or PMA
holder. Stealth Aerospace shall be held harmless to any damage caused by
relying on the information provided within this website.
|
